Steel Corporation
Mumbai, Maharashtra

Hardened and Tempered Spring Steel Strips

 

Leading Manufacturer and Exporter of Hardened and Tempered Spring Steel Strips such as Hardened Spring Steel Strips C-80 and Tempered Spring Steel Strips C-80 from Mumbai.


Hardened Spring Steel Strips C-80

 

Hardened Spring Steel Strips C-80
Hardened Spring Steel Strips C-80

These strips are stocked in different width, finish and different hardness range between 40 50 HRC (Std. Size of Hardened and Tempered Spring Steel Strips) in Grey, Bright polished, Blue polished surface finish.

 

Chemical Composition:

 

C:

0.75 - 0.90%

Mn:

0.50 - 0.90%

Si:

0/1 - 0.35

S&P:

0.04% Max

 

These strips can be sheared with low burrs to customer’s width requirements. On request and short lead time tailor made Strips can be produced as per customers requirement of hardness, width surface finish & different edges. Please check for Minimum economic batch quantity & lead time. Please see C-98 grade for lower thickness. These strips are widely used for making Coil Springs, Rulers, Saws, masonry tools, Jungle tools,Saw Steel, Steel for Springs, Steel for masonry tools and Spring Steel parts which do not require severe bending or forming.

 

This grade compares well with

 

  • AISI 1080/1085

  • CK 75/80

  • HC-14/EN42J, DIN 17200

  • JIS-S 80C & Sup 3

  • Blue tempered spring steel

  • Hardened and tempered spring steel strip

 

Features:


These Strips have good flatness and can be used for applications with little bending or no bending, direct use of these strips avoids hassles of heat treatment and thus distortions in components.

These strips have good blanking and punching properties.

We carry inventory of these strips in C80 grade only but we can also supply in C62 and C98 grades.

 

♦ OfSier Properties

Edges Sheared
Finish Grey, bright polished, or blued.
Hotness 0.025mm Max per 25mm of width.

 

**For More Information Refer To PDF.




Tempered Spring Steel Strips C-80

 

Tempered Spring Steel Strips C-80
Tempered Spring Steel Strips C-80

Our Clients can avail from us the wide & quality range of Tempered Spring Steel Strips C-80.

Chemical Composition:

 

C:

0.75 - 0.90%

Mn:

0.50 - 0.90%

Si:

0/1 - 0.35

S&P:

0.04% Max

 

These strips can be sheared with low burrs to customer’s width requirements. On request and short lead time tailor made Strips can be produced as per customers requirement of hardness, width surface finish & different edges. Please check for Minimum economic batch quantity & lead time. Please see C-98 grade for lower thickness. These strips are widely used for making Coil Springs, Rulers, Saws, masonry tools, Jungle tools,Saw Steel, Steel for Springs, Steel for masonry tools and Spring Steel parts which do not require severe bending or forming.

 

This grade compares well with

 

  • AISI 1080/1085

  • CK 75/80

  • HC-14/EN42J, DIN 17200

  • JIS-S 80C & Sup 3

  • Blue tempered spring steel

  • Hardened and tempered spring steel strip